Includes installation of the LesComm board into your radio. Plus adjustment to cover all bands and a tune up. Assumes radio has not been previously modified for extra channels. Does not include removing other mods. Return shipping extra.

Made for the Galaxy 2547, 919, 929, 979, 939, 949 or 959-DX but will fit any radio with the same board. Such as the Ranger Freedom-One TR696, 936, 966, 969.

This board will convert the aforementioned radio's to cover 180+ Channels*.

It has a +10kc switch and a 4 position band switch which allows band selection exactly like the higher priced radio's if you swap the crystal with the one in the kit. This way, when your buddy says "go to band A channel 15" on his $500 radio, you can follow on your radio!

The Microprocessor has a built in oscillator so changes happen lightning fast.

For the Galaxy 2547, 919, 929, 979, 939, 949 or 959-DX but will fit any radio with the same board. Such as the Ranger Freedom-One TR696, 936, 966, 969.

This board will convert one model of the above radio's using the 8719 PLL to cover 180 Channels*.

The 4 position band switch allows band selection exactly like the higher priced radio's if you swap the crystal with the one in the kit. It also has a +10kc switch.

The Microprocessor has a built in oscillator so changes happen lightning fast.

Specify the radio you want to install the board in, in the "Notes to Seller" section of Paypal.

Due to so many request for a Cobra version, and since the 8719-180 is out of production, we've adopted this board to now convert the Cobra 148GTL.

You also get 180 Channels*.

***Soldering IS required. It is not Plug and Play like the Galaxy board. But we are working to make the installation easier.***

All connections to the radio are made from the TOP of the board. NO cut runs!

It also has a +10kc switch and a 4 position band switch allows band selection exactly like the higher priced radio's if you swap the crystal with the one in the kit.

The Microprocessor has a built in oscillator so changes happen lightning fast.

Specify the Cobra 148GTL in the "Notes to Seller" section of Paypal.

Designed to compete directly with the Galaxy-Viagra board. Gives 3 band coverage but also has the +10kc switch to get those "A" channels. Yet, it retains the ability to upgrade.* Can be programmed to emulate the Green, Blue or Red Dot board. Your choice.

Use either the NB/ANL switch or the TONE switch. For the Galaxy 2547, 939, 949 or 959-DX but will fit any radio with the same board. Such as the Ranger Freedom-One TR696, 936, 966, 969. Can also be used with the Galaxy 919, 929, 979, but requires an additional switch. (On these the ANL/NB switch also switches the radio to PA.)

Simply change the crystal X3 with the one in the kit, unplug the NB/ANL or TONE switch and plug it into the board. Then unplug the channel selector cable and plug into the V2, plug the V2's cable to the main board. You're done!!

No more center frequency shifts when you change bands because the switching is done in the PLL, not with crystals.

The Microprocessor has a built in oscillator so changes happen lightning fast.

Specify the radio you want to install the board in, in the "Notes to Seller" section of Paypal.

* Must be returned to LesComm for upgrade.

This switch gives the last 10 channels of the range, .865 through .965.

Note: The shaft of the 5 position switch is 15mm vice 20mm as in the 4 position. See picture. It is not long enough for some radio's, to put it in the front panel.