Lester's Custom Truck Shop
United States
Webmaste
WORK IN PROGRESS
LC35 Install
-Set up the LC35 for a Cobra, just like the DX979
-Unplug the Ch19 connector from the channel selector PC Board
-Add a jumper from Ground to the PLL side of the of the Ch Sw PC Board
-Use the 14.7321 xtal (not the 14.735)
-Use the Ch19 Switch for the +10Kc
Intellectual Property Rights Owner Lester's Custom Truck Shop
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property of LesComm or its respective suppliers relating to the LesComm kits, including but not limited to, accessories, parts, or software relating there to (the“Expa Kit System”), is proprietary to LesComm and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All applicable rights of the Intellectual Property shall remain with LesComm and its suppliers.
**Kit installation instructions may be used and printed by those actually installing a LesComm kit.
NOTE; ONCE INSTALLED A LESCOMM KIT CANNOT BE RETURNED. However, all LesComm kits come with a lifetime warranty. We will repair or replace the kit at our discretion. Simply return the kit to us. Kit failure due to incorrect installation is not covered.
Copyright Lester's Custom Truck Shop. All rights reserved.
Lester's Custom Truck Shop
United States
Webmaste